Section 1: Chemical Product and Company Identification
Product Name: 2-Bromo-3-chloropyridine
Supplier: KINFON PHARMACHEM CO.,LTD
F4, No.5 Torch Ave, JLP Dist, Chongqing 400080, China
Section 2: Composition and Information on Ingredients
Name CAS #
Section 3: Hazards Identification
Harmful by inhalation, in contact with skin and if swallowed.
Section 4: First Aid Measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately flush eyes with running water for at least 15 minutes while keeping eyes open. Seek
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Section 5: Fire and Explosion Data
In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn.
Section 6: Accidental Release Measures
Personal precautions: Wear suitable personal protective equipmentwhich performs satisfactorily andmeets local/state/national standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbentmaterial, sweep up and keep in a tightly closed container for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.
Section 7: Handling and Storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,health and chemical hazard data given on this sheet.
Storage: Store in closed vessels.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear chemical-resistant gloves, safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.
Section 9: Physical and Chemical Properties
Appearance: white to light yellow solid
Odor: No data
Boiling point: No data
Melting point: No data
Flash point: No data
Density: No data
Molecular formula: C5H3BrClN
Molecular weight: 192.4
Section 10: Stability and Reactivity Data
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride, hydrogen bromide.
Section 11: Toxicological Information
Section 12: Ecological Information
Section 13: Disposal Considerations
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations.
Section 14: Transport Information
Non-hazardous for air and ground transportation.
Section 15: Other Regulatory Information
Indication of Danger: No data.
Risk Statement: No data.
Safety Statement: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear
suitable gloves and eye/face protection.
Section 16: Other Information
References: Not available.
Other Special Considerations: Not available.
All information and instructions provided in this Material Safety Data Sheet (MSDS) are based on the current state of scientific and technical knowledge. And above information is only for reference.