1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
Supplier: KINFON PHARMACHEM CO.,LTD
F4, No.5 Torch Ave, JLP Dist, Chongqing 400080, China
2. COMPOSITION/INFORMATION ON INGREDIENTS
Molecular Weight: 99.15
3. HAZARDS IDENTIFICATION
Classification of the GHS
Flammable liquids Category 3
HEALTH HAZARDS Not classified
ENVIRONMENTAL HAZARDS Not classified
GHS label elements Pictograms or hazard symbols Signal word Warning
Hazard statement Flammable liquid and vapour
[Prevention] Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
Keep container tightly closed.
Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
measures against ignition by the static discharge and the spark.
Wear protective gloves/eye protection/face protection.
[Response] IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
[Storage] Store in a well-ventilated place. Keep cool.
[Disposal] Dispose of contents/container through a waste management company authorized by the local government
4. FIRST AID MEASURES
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact: Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and airtight goggles.
5. SPECIAL FIRE FIGHTING PROCEDURES
Suitable extinguishing media:
Dry chemical, foam, water in large amounts, carbon dioxide.
Specific hazards: Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
spraying with water. Eliminate all ignition sources if safe to do so.
Special protective equipment for firefighters:
When extinguishing fire, be sure to wear personal protective equipment.
6. STEPS TO BE TAKEN IN CASE OF SPILL
Personal precautions,protective equipment and emergency procedures:
Use personal protective equipment. Keep people away from and upwind of spill/leak.
Ensure adequate ventilation. Entry to non-involved personnel should be controlled
around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for containment and cleaning up:
Absorb spilled material in dry sand or inert absorbent before recovering it into an
airtight container. In case of large amount of spillage, contain a spill by bunding.
Adhered or collected material should be promptly disposed of, in accordance with
appropriate laws and regulations.
Prevention of secondary hazards:
Remove all sources of ignition. Fire-extinguishing devices should be prepared in case of a fire. Use spark-proof tools and explosion-proof equipment.
7. HANDLING AND STORAGE
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Keep away from heat/sparks/open flame/hot
surfaces. -No smoking. Take measures to prevent the build up of electrostatic
charge. Use explosion-proof equipment. Wash hands and face thoroughly after
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Storage conditions: Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store away from incompatible materials such as oxidizing agents.
Packaging material: Law is followed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust. Also install safety shower and eye bath.
Control parameters: Not set up.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Eye protection: Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Liquid
Color: colorless to very pale yellow
Odor: No data available
pH: No data available.
Melting point/freezing point:-24 °C
Boiling Point/Range: 129 °C
Flash Point: No data available
Lower: No data available
Upper: No data available
Solubility: Miscible with : Water
10. STABILITY AND REACTIVITY
Stability: Stable under proper conditions.
Reactivity: No special reactivity has been reported.
Incompartible materials: oxidizing agents
Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulphur oxides
11. TOXICOLOGICAL INFORMATION
Acute Toxicity: No data available
Skin corrosion/irritation: No data available
No data available
Germ cell mutagenicity: No data available
IARC = No data available
NTP = No data available
Reproductive toxicity: No data available
12. ECOLOGICAL INFORMATION
Fish: No data available
Crustacea: No data available
Algae: No data available
Persistence / degradability: No data available
No data available
Mobillity in soil
log Pow: No data available
Soil adsorption (Koc): No data available
No data available
13. WASTE DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance.
14. TRANSPORT INFORMATION
Hazards Class: 3: Flammable liquid.
Proper shipping name: Flammable liquid, n.o.s.
Packing group: III
15. OTHER INFORMATION ON REGULATION
This MSDS is correct to the best of our knowledge and belief at the date of its publication but we
cannot accept liability for any loss, injury or damage which may result from its use.